To manage virtual IPs, virtual IP pools and DNS service via CLI, use the following commands.
Tip
For full CLI command syntax, including arguments, enter the command at the CLI prompt in the <command> <subcommand> format provided in the table, followed by ?.
To do this task... |
Use this command... |
|---|---|
Display virtual IP pools |
|
Display details of specific virtual IP pool |
|
Display assigned virtual IPs. |
|
Create virtual IP pool |
|
Delete virtual IP pool |
|
Modify virtual IP pool |
|
Display DNS service configuration |
|
Create DNS service configuration |
|
Modify DNS service configuration |
|
Delete DNS service configuration |
|
Comments
0 comments
Article is closed for comments.