-
From the left navigation menu, select Network Access and then Virtual IP Pools.
-
Click + Create VIP Pool and complete the fields:
Field
Description
Name
Enter a name for the VIP Pool.
Gateway IP
If your storage clients are on multiple subnets and you are routing your client storage traffic through a local gateway device, enter the gateway IP.
Subnet CIDR (required)
Specify the subnet in Classless Inter-Domain Routing (CIDR) notation.
In CIDR notation, the subnet is expressed as the number of bits of each IP address that represent the subnet address. For example, the subnet mask 255.255.255.0 is expressed as 24 in CIDR notation.
VLAN
If you want to tag the VIP pool with a specific VLAN on the data network, enter the VLAN number (0-4096). See also Tagging VIP Pools with VLANs.
Domain Name
Optionally specify a domain name to associate with the VIP pool for DNS resolution by the VAST Cluster DNS server. If a domain suffix is defined in the DNS server configuration, it is appended to the domain name to form a FQDN.
Role
Set this to Protocols for data network access. The replication role is for creating a VIP pool dedicated to native replication.
CNodes
If you want to dedicate a specific group of CNodes to the VIP pool, open the drop-down and select all the CNodes you want to include in the group. The VIPs in this pool will only be distributed among the selected CNodes.
If you do not specify any CNodes, the pool will be distributed among all active CNodes.
VMS Preferred
Enable this setting if you would like the CNodes that are assigned VIPs from this pool to belong to a preferred domain for VMS failover. For more details, see VMS Hosting Impact and Preferences.
IP Ranges List
The set of IPs that belong to the VIP pool, which can include multiple different contiguous ranges. For each range, add the Start IP and End IP in the fields provided. To add a range, click Add IP Range button. to add another range.
To remove a range, click the Remove button for that range.
-
Click Create.
The virtual IP pool is saved. IP addresses from the pool are assigned automatically to the CNodes. You can view the assigned virtual IPs per CNode on the Virtual IPs tab.
On the Virtual IP Pools tab, click
to open the Actions menu for the VIP pool and select Edit.
Make your changes and click Update.
To manage virtual IPs, virtual IP poolsvia CLI, use the following commands.
Tip
For full CLI command syntax, including arguments, enter the command at the CLI prompt in the <command> <subcommand> format provided in the table, followed by ?.
Comments
0 comments
Article is closed for comments.