From the left navigation menu, select Network Access and then Virtual IP Pools.
Click + Create VIP Pool and complete the fields:
Enter a name for the VIP pool.
Enter an IPv4 address for the gateway.
The gateway IPv4 address is required if your storage clients are on multiple IPv4 subnets and you are routing the client storage traffic through a local gateway.
Enter an IPv6 address for the gateway.
The gateway IPv6 address is required if your storage clients are on multiple IPv6 subnets and you are routing the client storage traffic through a local gateway.
Subnet CIDR IPv4 (required if using IPv4)
Specifies the subnet in Classless Inter-Domain Routing (CIDR) notation for IPv4.
In CIDR notation, the subnet is expressed as the number of bits of each IP address that represent the subnet address. For example, the subnet mask 255.255.255.0 is expressed as 24 in CIDR notation.
Subnet CIDR IPv6 (required if using IPv6)
Specifies the subnet in Classless Inter-Domain Routing (CIDR) notation for IPv6.
In CIDR notation, the subnet is expressed as the number of bits of each IP address that represent the subnet address. For IPv6, this is known as IPv6 prefix length. For example, the prefix length of /32 in 2001:db8::/32 would include IP addresses from 2001:db8:: to 2001:db8:ffff:ffff:ffff:ffff:ffff:ffff.
If you want to tag the VIP pool with a specific VLAN on the data network, enter the VLAN number (0-4096). See also Tagging VIP Pools with VLANs.
If you want to dedicate a specific group of CNodes to the VIP pool, open the drop-down and select all the CNodes you want to include in the group. The VIPs in this pool will only be distributed among the selected CNodes.
If you do not specify any CNodes, the pool will be distributed among all active CNodes.
If Port Membership for the VIP pool is set to RIGHT or LEFT, only right or left ports on the selected CNodes will be used for load balancing in this VIP pool.
Set this to Protocols for data network access. The replication role is for creating a VIP pool dedicated to native replication.
Enable this setting if you would like the CNodes that are assigned VIPs from this pool to belong to a preferred domain for VMS failover. For more details, see Configuring Network Access.
Determines which port (right or left) in a group of CNodes is allocated to the VIP pool. For more information, see CNode Port Affinity. By default, all ports on the pool's CNodes are included in the VIP pool.
VAST DNS Configuration: VIP Pool Domain Name
If you are using the VAST Cluster DNS server, specify a domain name to associate with the VIP pool. The domain suffix is defined in the DNS server configuration, is appended to the VIP pool domain name to form a fully qualified domain name (FQDN). Requests for that FQDN will be allocated VIPs from this pool.
The FQDN formed from the current value entered into the field and the domain suffix is displayed below the field as the DNS Service FQDN.
IP Ranges List
A set of IPv4 or IPv6 addresses that belong to the VIP pool, which can include multiple different contiguous ranges.
For each range, add the Start IP and End IP.
To add a range, click the Add IP Range button.
To remove a range, click the Remove button for that range.
The virtual IP pool is saved. IP addresses from the pool are assigned automatically to the CNodes. You can view the assigned virtual IPs per CNode on the Virtual IPs tab.
On the Virtual IP Pools tab, click to open the Actions menu for the VIP pool and select Edit.
Make your changes and click Update.
To manage virtual IPs, virtual IP pools via CLI, use the following commands.
For full CLI command syntax, including arguments, enter the command at the CLI prompt in the <command> <subcommand> format provided in the table, followed by ?.