This command creates a VIP pool.
Usage
vippool create --ip-ranges IP_RANGES [--subnet-cidr CIDR] [--subnet-cidr-ipv6 CIDR] [--gw-ip IPV4] [--gw-ipv6 IPV6] [--vlan VLAN] [--cnode-ids CNODE_IDs] [--cnode-names CNODE_NAMEs] [--name NAME] [--vast-dns-domain-name DOMAIN_NAME] [--role PROTOCOLS|REPLICATION|BIG_CATALOG] [--vms-preferred] [--not-vms-preferred] [--port-membership ALL|RIGHT|LEFT] [--tenant-id TENANT_ID] [--serve-all-tenants]
Required Parameters
|
Lists the ranges of IPv4 or IPv6 addresses included in the VIP pool. Specify For example: |
Options
|
Specifies the subnet in Classless Inter-Domain Routing (CIDR) notation for IPv4. In CIDR notation, the subnet is expressed as the number of bits of each IP address that represent the subnet address. For example, the subnet mask 255.255.255.0 is expressed as 24 in CIDR notation. Specify For example: |
|
Specifies the subnet in Classless Inter-Domain Routing (CIDR) notation for IPv6. This option is required if IPv6 is used in In CIDR notation, the subnet is expressed as the number of bits of each IP address that represent the subnet address. For IPv6, this is known as IPv6 prefix length. For example, the prefix length of /32 in 2001:db8::/32 would include IP addresses from 2001:db8:: to 2001:db8:ffff:ffff:ffff:ffff:ffff:ffff. Specify For example: |
Specifies a gateway IPv4 address. Use this option if your storage clients are on multiple subnets and you are routing your client storage traffic through a local gateway. |
|
|
Specifies a gateway IPv6 address. Use this option if your storage clients are on multiple subnets and you are routing your client storage traffic through a local gateway. |
|
Tags the VIP pool with a specific VLAN on the data network. See Tagging VIP Pools with VLANs. Specify |
Dedicates a specific group of CNodes to the VIP pool. The VIPs in this pool will only be distributed among the specified CNodes. Specify By default, VIP pools are distributed among all active CNodes. |
|
|
Dedicates a group of CNodes to the VIP pool, specifying CNodes by name. Specify CNode names as a comma separated list. For example: By default, VIP pools are distributed among all active CNodes. |
|
Specifies a name for the VIP Pool. |
|
Specifies a domain name to associate with the VIP pool for DNS resolution by the VAST Cluster DNS server. If a domain suffix is defined in the DNS server configuration, it is appended to the domain name to form a FQDN. |
|
Determines the usage of the VIP pool:
|
|
Sets CNodes participating in the VIP pool to belong to a preferred domain for VMS failover. For more details, see Configuring Network Access. |
|
Disables |
|
Determines which port (right or left) in a group of CNodes is allocated to the VIP pool. For more information, see Configuring Network Access. By default, all ports on the pool's CNodes are included in the VIP pool. |
|
Specifies a tenant for the VIP pool to serve exclusively. |
|
Detaches a tenant from the VIP pool, so that the VIP pool serves all tenants. |
Example
vcli: admin> vippool create --ip-ranges 203.0.113.2,203.0.113.5 203.0.113.8,203.0.113.24 --subnet-cidr 24 --gw-ip 203.0.113.1 --vlan 60 --cnode-ids 1,2,3 --name vippool1
Comments
0 comments
Article is closed for comments.