Articles in this section

cnode led

Sara Levy
  • Updated
Follow

This command makes the CNode LED blink or turns it off.

Usage
cnode led {--id ID}|{--name NAME}
          --blink|--off
Required Parameters

{--id ID}|{--name NAME}

Specifies the ID or the name of the CNode to manage the LED state.

--blink|--off

Sets the LED state:

  • blink. The LED starts blinking.

  • off. The LED goes off.
Example

This example shows turning off the LED on CNode 1:

vcli: admin> cnode led --id 1 --off

Related articles

Comments

0 comments

Article is closed for comments.